Table of Contents
Advertisement
Press SELECT to accept the changes or SETUP to escape without making any changes.
4.1.3. Setup Key Group
SETUP:
Press the SETUP button to enter the setup menu. Options will be displayed on the
display panel. Use the shaft encoder to cycle through the available setup options.
Press the SELECT button to choose the currently displayed setup option; the current
value for that setup option will be displayed. Use the shaft encoders to change the
value. Press the SELECT button to save the change or the SETUP button to cancel the
change or exit that setup option. Press the SETUP button again to exit the setup menu
completely. All buttons on the DCP panel are disabled when the user enters the "On
Screen Menu" system, with the exception of the SELECT, SETUP and PANEL LOCK
buttons.
SELECT:
The SELECT button is similar to the "enter" key on a standard PC keyboard. The button
is used to confirm operations, save settings, confirm choices etc.
KEY SELECT:
This is a quick access into the internal menu system of the DSK unit. This button
enables the user to access the Key Type level of the menu system. This is similar to
pressing the SETUP button to access the menu system and then using the shaft
encoders to select the Key type option from the DSK sub-menu. After pressing the KEY
SELECT, the user may adjust the value for either input or self. Select Input to use the
Input Key from the Key video input Source or select "Self" to use the settings provided in
the Threshold, Sharpness, and Filter settings that follow. In the "Self" mode, the video on
the fill input is used as a source for keying based on the other related parameters
mentioned above. Press SELECT to accept the changes or SETUP to escape without
making any changes.
DESKTOP CONTROL PANEL
HD9626DSK Instruction Manual
Revision 1.4
Page 4-3
Advertisement
Table of Contents
