Setting The Transition Type; Setting The Transition Rate - evertz HD9626DSK Instruction Manual

HD9626DSK Instruction Manual

3.8.1. Setting the Transition Type

TRANSITION
Transition Type
fade
cut
fade-cut
fade-fade
cut-fade
diamond in
diamond out
circle in
circle out
box in
box out
TB split
LR split
TB curtain
LR curtain
TR box
TL box
BR right box
BL box
wipe xxx

3.8.2. Setting the Transition Rate

TRANSITION
Transition Rate
1 to 600
Page 3-14
This menu item is used to select the type of transition you would like applied
when the TRANSITION button is pressed. Transition effects only appear on
the program output. Transitions on the Preview Output are always a Cut
type performed at the end of the transition to program.
The fade-cut, fade-fade, and cut-fade transitions are two stage transitions.
The transition shown first will be applied to the outgoing video, followed by
the second transition. For example a fade-fade transition is a fade out to
black followed by a fade in from black.
The numbers following the wipe patterns reference the angle of the wipe
and direction of the wipe. Arrows indicate direction of wipe. For example a
Wipe 45 transition will start a 45 degree wipe that will progress from the top
left of the screen to the bottom right of the screen.
This menu item is used to set the time for the transition to complete. The
duration is measured in frames.
Use the or pushbuttons to change the Transition Rate value and press
the SELECT button.
Revision 1.4
OPERATION