Table of Contents
Advertisement
4.
PRECAUTIONS WHEN DESIGNING A SCREEN
MELSEC-A
4.8.2
Creation of parts and limitations o n creation
Create the parts by using the GED. However, do not register parts that are
createdfor the monitoring display of an AD57G when registering graphic parts
created by the GED.
Registration means the writing of graphic parts.
Register the parts (Max.
100)
to be used in a part file along with the
registration of a canvas screen.
However, when creating the part file, use a system name that is different from
canvas screen data or a machine.
Then, create parts only once on each screen.
(Part
No.
100)
: "
Y m e n
NO.
1
(Part
NO.
1)
Make sure to do grouping when parts are created by using two or more
figures.
I
.
Each part is distinguished by grouping.
Then, make the coordinates on the left of the drawing area (part frame) 0 and
0,
and graphic coordinates are compensated.
When grouping is not done, only the figure drawn first is distinguished as a
part.
(The GED Operating Manual gives details about grouping operations.)
Advertisement
Table of Contents
