Table of Contents
Advertisement
3. AD57G MONITORING FUNCTIONS
MELSEC-A
(2) Settings by using the
AD57GP
Monitoring conditions in the Set device writer (number input, character
string input) window must be set.
The monitoring conditions that should be set at each setting item of the
window are explained below.
The Operating Manual gives details about item setting methods.
I
Set device writer (number input, character string input) window
,
A
Attribute
Col.
I
3) =size
(Point)
4)
Magnification
rn
lumber
5)
11
llp format
1
6)
Write trigger key
7)
1
storing device
1
(
T k
...,.. -
,
Contents of Monitoring Condition Settings
Set the displa color of the keyed-in character in the input area of the color attribute
Col. Attribute
I
.
.
dY
select~on wln ow. The attribute cannot be set. (Fixed)
Setllng Item
I1p position
Setting Contents
Set the head position of the input area in which a numerical value to be written in a device
set in 7) is displayed.
Magnification
I
Setting is disabled. ('I' is set.)
Char size
(Point)
I
Set the following in the display format (input) setting window.
Set the size to display the keyed-in character to the input area. (16 is fixed.)
1 column times the input number of digits
:
0
- r
Inout number of digits
Display
:
Set the input format of the numerical value to be written in a device set in
format
7) in either decimal or hexadecimal.
(input)
Keyed-in data in the input area is displayed in this format.
Ilp format
Data
:
Set the unit to 16 bits (1 word) or 32 bits (2 words) to write a keyed-in
numerical value to a device.
Display
:
Set the max. input number of digits of the numerical value to be written to
(input)
a device. (Include a code digit when a decimal is set (see (3)).
number
The number of columns of the inout area is determined by this number of
Write trigger
key
of digits
digits setting and the character site setting of 3).
Set the key that determines the timing in which input data displayed on the input area is
written to the device set in 7). After setting the key, an entry code that corresponds to the
setting key is displayed i n hexadecimal.
When setting the write trigger by the entry code as input switchin
select hexadecimal.
And, when setting the write trigger key by the character, select A&I.
Storing
device
Set a device in which the numerical value displayed in the input area is written in the
monitor device setting window by inputting the write trigger key set in 6).
Advertisement
Table of Contents
