Table of Contents
Advertisement
3. AD57G MONITORING FUNCTIONS
MELSEC-A
[Monitor screen creation]
The following gives the settings required to use the scroll type (file storage)
trend graph.
(1) Graphic data set by using the GED
t
Canvas screens such as the graph display frame, scale display, and unit
display must be created.
(2) Settings by using the AD57GP
The monitoring condition in the Set trend graph window must be set.
The monitoring conditions that should be set at each setting item of the
-
window are explained below.
The Operating Manual gives details about item setting methods.
Number
4)
Set trend graph window
6 )
1
Point space
I
I
m ( 1 - 5 0 0 )
7)
10isplay format
--
Monitoring Condition Setting Description
8)
9)
Data collection trigger
: To display a graph, set (a) the condition (timing)
which the AD57G collects data, and
(b)
the bit
device that is used.
No. of graph lines
1
Monitor device
I
Setting Item
Trend graph type
Grid (Scroll)
Trigger
n ( i . 1 6 )
PC
0
~ e v i c e
0
I p z c - 7
I
1
- 1
Setting Contents
Set scrolling.
With (a set value cannot be changed.)
Set the following in the data collection trigger setting (scroll) window.
Collecting method
: Set the screen display.
Storage target memory
:
To store collected data to the memory card.
set an applicable card.
Card No. 1
: Memory card to be installed in MEMORY CARD1
of an AD57G
Card No. 2
: Memory card to be installed in MEMORY CARD2
of an AD570
Storage comment
: To store collected data to the memory card,
set a comment to be written to a file. This
comment is used to specify a file when executing
\
reproduction display or ouiput to the printer.
-
Sprite frame
Set the upper left and lower right coordinates of the graph display range.
Advertisement
Table of Contents
