Table of Contents
Advertisement
3.
AD57G MONITORING FUNCTIONS
MELSEC-A
;ollection freq.
Jata del timing
Print trigger
Mem. card
Comment
Allocation
(Continued from the previous page)
Setting Contenta
Set the number of report data file records in which collected data is stored to the range of
to 500.
See Sections 3.9 ( 6 ) and (8) (d),(e).)
Nhen allocating several report canvas screens to a report, the number of report data file
ecords that corresponds to each report canvas screen is equal to the number of this
Cetting.
Nhen storing data about the number of collection times, set continue or stop following
lata collection and file storage.
h e
function
1).
Overwrite : continue
Stop
: completed
.egging data stored to the report data file is deleted.
Power
ON
: Deleted when the AD57G starts
up.
Print
: Deleted after data is printed by the print trigger set in 7).
Bit device : Data is deleted at the leading edge and falling edge of the bit device
specified by the user.
Nhen executing data collection, fiie storage, and printing by specified timing, data is
jeleted after processing is completed.
To print data stored to a report data file, set the condition (timing) for printing data
xllected in the AD57G as fallows:
Bit device : Set the leading edge and falling edge of the utilized bit device in the
data collection trigger setting window.
Time
: Set the printing time in the data printing time specification window.
Continuation: Set the printing time and period (printing time interval).
Random
: Set the time when 48 times (Max.) are printed.
Select a memory card (type of RAM) to store a report data fiie in which data of a report
currentlv beina set is stored.
-
'1' : The memory card lnserted to the MEMORY CARD1 slot of the AD57G.
'2'
: The memory card inserted to the MEMORY CARD2 slat of the AD57G.
Set the comment used for the set report data to be stored to the report data file.
This comment is used to specify the file when the data is redisplayed on the AD57G
systemlreport screen.
Select the report canvas screen in which following monitoring condition is to be set by 1
to 8 (page).
Set report parameter window
Repeat
range
: Set the range to be printed repeatedly on the report canvas screen
Set report (Printing allocation) window
Print time
: When printing the starting time and date of collected data, set the
printing position on the report canvas screen.
Lag time
: When printing the collection time and date of data that is printed, set the
printing position on the report canvas screen.
Lag data
: Set the device in which data is to be collected.
Set the printing position of collected data on a report canvas screen.
Page numbers 1 to 8 correspond to the screen numbers set when creating report canvas
screens by the GED which are registered in a report file.
Advertisement
Table of Contents
