Table of Contents
Advertisement
3. AD57G MONITORING FUNCTIONS
MELSEC-A
[Monitoring example]
The following explains the "sequence program set by using the PC CPU"
which is needed to turn the LEDs on the operation panel ON and OFF.
(1) Sequence program set by using the PC CPU
Turns output signals ON and OFF according to the location of the
AD57G.
Turning ON the
[Fl]
key LED when the AD57G is installed in slot 0 or 1
(Y10 to Y1F)
[ F l ]
LED turns
ON
I+
Advertisement
Table of Contents
