Table of Contents
Advertisement
3. AD57G MONITORING FUNCTIONS
MELSEC-A
(b) Settings by using the AD57GP
It is necessary to set the conditions and positions of printing for the
"print start time and date", "data collection time", and each "collected
data" on a report canvas screen drawn by the GED.
In addition, to repeatedly print data collected several times without
page changes, set the "repeat printing range" and the "number of
times of repeat printing".
I
Example:
Set a repeat printing range.
When using the logging report, set the number of times of repeat
printing in this range. (' 1 ) (By this setting, a set repeat printing
r
Set printing start time and date.
range is printed (set number of times of repeat printing
+
1).
(By
automatically
this setting,
.) data is printed
Set data collection timellogging time of data
Set these for each collected data1
to be printed. (*!)
By thls setting, data is
logging data. (' 1 )
printed
automatically.)
'
+I
(a) When setting a repeat printing range (See (8) for the example.)
b r i n g monitor:ng. a newly-set repeal printing ran e is printad after the
previous rcpeat printing range is printed. (DLring i f e logging report, p r n t -
(
ing is executed the set number of times of repeat printing.)
Aftcr the last line of
a
repeat printing range is printed, a return is
inserted.
-
Data print positions must be set within
a
range between the first and last
lines of the repeat printing range set on the report canvas screen.
(b) When not setting a repeat printing range
During monitoring, printing is suspended when data contained on one
page of drawn screen is printed.
Data print positions can be set at any point on a report canvas screen.
' 2
When set, the display position of a report canvas shifts for eight dots upward
(in the
Y
axis) compared with the position when the GED is used.
Advertisement
Table of Contents
