Table of Contents
Advertisement
3. AD57G MONITORING FUNCTIONS
MELSEC-A
Example: When three reports are registered in an AD57G, and two
report canvas screens are allocated to one of the reports
I I1 I1 I
SCR
Report file
/ -
Report canvas
Report canvas
screen (Page 1)
screen (Page 2)
Report canvas
Report canvas
screen (Page 3)
screen (Page 4)
(For the logging report)
For real-time
For real-time report
'
(
report continuous)
(
w ~ t h page change
Report 1
Report 2
Report 3
(5)
Report parameter settings by using the AD57GP
The following settings done in the report parameter setting window of
the AD57GP can be set for each type of report. Only one monitoring
condition can be set per report.
But a condition of monitoring of one can be set at a report.
Report format:
Data collection trigger:
Valid only for all report canvas screens of one report.
Repeat printing range and the number of times of repeat printing:
Valid only for set report canvas screens in a report.
Number of times of collection and over processing:
Data deletion timing:
Print trigger, collection and printing conditions:
Memory card No. and comments:
Valid only for all report canvas screens of one report.
When allocating several report canvas screens to a report, settings done
on the last report canvas screen when setting one report are valid.
It is necessary to set a repeat printing range and the number of times of
repeat printing on each report canvas screen that must be set.
Advertisement
Table of Contents
