Table of Contents
Advertisement
5. TEST MODE OPERATION BEFORE EXECUTING
MONITORING WITH AN AD57G
MELSEC-A
[Operating procedures]
(1)
File formatting operating procedure
Test mode
menu
screen
Set the RUNISTOP
keyswitch of the AD57G
to
STOP.
Test Mode Menu
_ I
Set the RUNISTOP
keyswitch
of
the A057G
to RUN
or
KEY LOCK.
1
Memory card format
File format
*
The corresponding functions of the func-
tion keys
are
displayed on the
screen.
If
a
display module with a touch panel
(Select file format)
( A 7 G D - [ ] [ I ) is used, the function key
codes are allocated corresponding
to
the
above-mentioned function key display.
File formatting screen
(See item (2) on the
previous page.)
.......
Contents
are
the same as on the
memory card format screen.
(2)
Formatting operating procedure
Only the formatting target can be set on this screen. Other items cannot
be set on this screen.
(a) Select a memory card whose file area is to be formatted
Use the
[ f ]
and [J] keys to designate the location of the memory card
whose file area is to be formatted.
(b) Start formatting
Press the
[A]
key.
(c) Screen switching
After formatting is completed, press the
[Fl]
key.
The test mode menu screen reappears.
. .
The memory card format screen cannot be switched to another
screen before formatting is completed.
Advertisement
Table of Contents
