Appendices; Appendix 1 Spare Parts Storage - Mitsubishi MELSEC Q Series Handbook

APPENDICES

Appendix 1 Spare Parts Storage

(1) The general specifications of programmable controllers are as follows. Please do not store
spare parts under a high temperature or high humidity condition, even within the range
guaranteed by the specifications.
Storage ambient temperature
Storage ambient humidity
(2) Store in a place avoiding direct sunlight.
(3) Store under a condition with no dust or corrosive gas.
(4) The capacity of the batteries (such as an A6BAT battery and an A8BAT battery) or a
lithiumcoin battery (commercially available) for memory card is decreased by its self-
discharging even when it is not used. Replace it with new one in 5 years as a guideline.
(5) Among power supply modules or CPU modules with built-in power supply that use any
aluminum electrolytic capacitor, the characteristics of the modules listed below will be
deteriorated if they are left un-energized for a long time. Therefore, take the following
measures.
CPU module
(Power supply built-in type)
Power supply module
Analog module
[Measures for preventing aluminum electrolytic capacitor characteristics deterioration]
Apply the rated voltage to the aluminum electrolytic capacitor for several hours to activate it. Or,
rotate products at the periodic inspection (in every 1 to 2 years).
[Reference]
The life of an aluminum electrolytic capacitor, even if not used and under a normal temperature,
decreases approximately 4 times slowly than the case when it is energized.
App
- 1
-20 to 75 °C
10 to 90%, no condensation
Product
A1NCPU, A1NCPUP21, A1NCPUR21, A1NCPUP21-S3, A2CCPU,
A2CCPUP21, A2CCPUR21, A2CCPUC24, A2CCPUC24-PRF,
A2CJCPU-S3
A1SJHCPU
A61P, A61PEU, A61P-UL, A62P, A62PEU, A63P, A68P, A61RP,
A67RP, A2CJ66P
A1S61PN, A1S62PN, A1S63P
A62DA, A62DA-S1
A1S64AD, A1S68AD, A1S62DA, A1S68DAI, A1S68DAV,
A1S63ADA, A1S66ADA
Model