Head Timing - Bernina E 16 PRO User Manual

17.1. Head Timing

The Head Timing screen deals with the Z-rotation of the machine.
Tapping almost any button in this screen will make the machine move the needle. Be careful and
stay clear of the needle.
Exiting this screen will also cause the machine to return to the Head Up position.
Move To a Specified Degree
1. Enter a number into this field.
2. Press the move to button to move to this rotation.
3. The Current Z Position will display near the bottom of the screen.
Or use the buttons to the right to go to specific Head Timing positions
Top Center
·
Head Up
·
Bottom Center
·
Hook Timing
·
Move By a Specified Degree
1. Enter a number into this field.
2. Press the rotate back to rotate back by the specified amount, or
3. Press the rotate forward to rotate forward by the specified amount.
4. The Current Z Position will display near the bottom of the screen.
Or use the buttons below to rotate by their specified amounts.
Rotate plus 20°
·
Warning!!
98