Bernina E 16 PRO User Manual page 44

This is helpful when changing needles or capturing threads in the trap behind the needles.
o
Presser Foot Adjustment
This will bring the needle to its bottom-most rotation for a better view of the presser foot at this location. This
is used for adjusting the presser foot height against the material.
Maintenance & Settings
Maintenance
Access to maintenance timers and technician screens is found within Maintenance.
This button will flash if a maintenance procedure is due.
·
Settings
Here settings such as preferences, design filters, time zones, and network settings can be found.
This button may flash if a software update is available.
·
Physical Buttons
Start / Stop
This button will begin or stop sewing. A green or red light will indicate when the button is available for use
and what function is associated with the button.
Unlit - When unlit, this button has no function. This is usually due to the current screen or state of the
·
machine.
Green - When lit green, pressing this button will cause the machine to begin or continue sewing the
·
currently loaded design.
Red - When lit red, pressing the button will cause the machine to stop sewing.
·
· Red while stopped - This indicates a critical error has occurred.
Warning!!
44