Table of Contents
Advertisement
The thread feed gear is not in the home position.
o
Feeder Profile
·
Use the Feeder Profile button to rotate the thread feed motor one full revolution to analyze
o
the tooth profile of the drive gear and populate the fields below the button.
Feeder Home Adjust
·
When enabled, this allows for a slight adjustment to the rotation of the gear when in the
o
home position.
Feeder Home Adjust is enabled
o
Feeder Home Adjust is disabled
o
The value entered when enabled is the amount of the adjustment.
o
Status Log
The status log shows the latest captured action of the machine.
Tapping this will open the status log and display a history of actions along with timestamps.
106
Advertisement
Table of Contents
