Bernina E 16 PRO User Manual page 43

Move to Trim
·
Tapping this will bring up a scrollable area with design segments previewed.
o
These segments are divided by trims.
o
Select the segment to move to and confirm to move through the design to the desired trim
o
command/start of segment.
Move to Color
·
Tapping this will bring up a scrollable area with design segments previewed.
o
These segments are divided by color change commands.
o
Select the segment and confirm to move through the design to start of the desired color
o
block.
Machine Operations
Machine Operations will move or activate different functions of the machine often used when embroidering
both during and between runs and jobs. These would include:
Hoop Forward/Back
·
Moves the frame forward as far as possible while leaving the needle within the sewfield of the
o
hoop.
Tapping again will move the frame back in to the original position.
o
Trim Immediate
·
Causes the machine to execute a trim command.
o
Change to Needle (Move Needle case)
·
Tapping this brings up a window displaying the thread tree / needle assignments.
o
Selecting the desired needle number and confirming will move the needle case to that needle.
o
Laser On /
·
Activates or deactivates the laser for positioning.
o
Grabber In /
·
Closes and opens the grabber.
o
Laser Off
Grabber Out
43