Machine Preferences - Bernina E 16 PRO User Manual

16.3. Machine Preferences

All Thread Detection
·
When disabled, no upper or lower thread breaks are detected. Disabling automatically
o
disables Bobbin Thread Detection.
When enabled, upper thread breaks are detected. Enabling DOES NOT automatically
o
reenable Bobbin Thread Detection.
Thread break detection can be affected by poor hooping technique, unsuitable Acti-Feed
o
settings, and inappropriate presser foot adjustment.
Bobbin Thread Detection
·
When disabled, no lower thread breaks are detected.
o
When enabled, lower thread breaks are detected.
o
Move Hoop Forward at End of Design
·
When disabled, the hoop will remain where the design ended. This is usually at design
o
origin.
When enabled, the hoop will move forward as far as possible with the needle still
o
remaining within the hoop limits.
Inching Stitch Count
·
When beginning to sew at the start of a design or after a trim, the machine will sew slowly.
o
This is the number of stitches the machine sews before starting to speed up to the set speed.
Upper Break Backup Count
·
When an upper thread break is detected, the machine will automatically back up this specified
o
number of stitches.
It will not back up past a trim, color change, or start of a design.
o
Bobbin Break Backup Count
·
When a bobbin thread break is detected, the machine will automatically back up this specified
o
number of stitches.
It will not back up past a trim, color change, or start of a design.
o
89