Table of Contents
Advertisement
16.2.1. Pull Compensation
Selecting a Compensation Table
1. Tap the expand-down button to open the drop-down.
Tapping within the field will allow the name of any custom table to be edited.
o
Wide-Angle Driver offsets will be added to the global compensation values when using any
o
frame that utilized the wide-angle driver.
2. From the list, tap to select the desired table.
Editing a Variable Compensation Table
With a compensation table selected, the values will populate below.
Tap in any field other than the 0 or ∞ width fields to begin editing.
Width Range - This is the range that the different compensations will affect.
·
This range is displayed in points (0.1mm)
o
The width of the satin stitches are adjusted by percentages and by points (0.1mm).
Percentage - the width of the satin stitches are multiplied by this value.
·
Points - the satin stitch width has this value added to each end of the stitch.
·
The values of 100% and 0 points will load the design unaltered.
·
These stitches can be altered along the X-axis (horizontal stitch direction) and along the Y-axis (vertical stitch
direction).
If locked together, X and Y will both be changed according to the value entered for X.
·
If unlocked, X and Y can be altered independently.
·
Saving Changes
Changes to the value fields will be saved by any of the following.
Shifting focus to another field
·
Selecting another table
·
Confirming out of the screen
·
87
Advertisement
Table of Contents
