Bernina E 16 PRO User Manual page 55

Colorize the Thread Tree
To access the screen to colorize the thread tree, either
Double-tap on a thread cone on the thread tree display
·
OR
o
Tap on the Colorize Thread Tree button
·
To assign a thread to a needle
1. Tap the desired needle/cone on the thread tree to select it.
Once selected, the circle representing the needle/cone will be ringed to highlight it.
o
If the needle is already populated and the thread exists in the selected chart, the list will
o
automatically scroll to the selected swatch.
2. Tap the desired thread chart to select it from the list.
3. Tap to select the desired color from the contents of the selected chart.
The search functionality can hasten the search.
o
The swatch will highlight when selected.
o
The cone/needle will change to match the color selected.
o
4. Select another cone/needle to change or tap the confirm button to exit to the Color Sequence
screen.
Color Sequence
The color sequence runs through the bottom portion of the screen. This area is scrollable and may be swiped
to view different sections of the sequence.
Each color change / color block is separated into two parts.
Upper - The upper section of the color block displays
·
A background color from the assigned needle.
o
An overlay of any effects applied to that color block.
o
§
Normal embroidery - no effects applied
55