Bernina E 16 PRO User Manual page 76

4. Confirm the position of the second point by tapping the confirm second point button.
5. Once both points are confirmed, the design is rotated to match the line created by the two
points and the positioning buttons become available. Tapping any one of the following buttons will
differently position the design in relation to the line created by the two confirmed points.
Position the bottom of the design on the line and the design origin horizontally aligned to
o
the first confirmed point.
Position the bottom of the design on the line and the design origin horizontally centered
o
between the first and second confirmed points.
Position the bottom of the design on the line and the design origin horizontally aligned to
o
the second confirmed point.
Position the design origin horizontal axis on the line and the design origin horizontally
o
aligned to the first confirmed point.
Position the design origin horizontal axis on the line and the design origin horizontally
o
centered between the first and second confirmed points.
Position the design origin horizontal axis on the line and the design origin horizontally
o
aligned to the second confirmed point.
Position the top of the design on the line and the design origin horizontally aligned to the
o
first confirmed point.
Position the top of the design on the line and the design origin horizontally centered
o
between the first and second confirmed points.
Position the top of the design on the line and the design origin horizontally aligned to the
o
second confirmed point.
76