Bernina E 16 PRO User Manual page 17

Note: Lift up item G (Cart Shelf) slightly to align item E (Screw) with the threaded inserts in the Cart
Legs (items A and B). Assemble loosely, do not tighten.
3. Install (2 each) items E and F (M6 x 12mm Screw and M6 Washer) at locations shown towards the back
side of the Cart.
Note: Lift up item G (Cart Shelf) slightly to align item E (Screw) with the threaded inserts in the Cart
Legs (items A and B). Assemble loosely, do not tighten.
4. Fully tighten all (4) item E Screws.
Cart Assembly Complete!
With two people, lift the machine onto the Cart so the (4) Machine Locators (item H) on top of the Cart are
centered over the round bosses on the bottom side of the Machine.
Do not attempt to lift the machine by yourself. Always move the machine with two people. Do not lift
the machine at any points other than the Lift Handles indicated by the "LIFT HERE" stickers in the
machine packaging. Otherwise, damage to sensitive parts might result.
Warning!!
17