Bosch Solution 16plus Installation Manual page 95

Type = Keyfob
Ur001 User 1 Name!
RFID = 123456789
Press OK or MENU
3) To test another transmitter, repeat step 2. A beep will be heard
each time a new RFID is received and the new number will be
displayed.
S ER IAL D EV ICE OP TI ONS
Devices > Serial Device >
Device Type
0 = Disabled
1 = Serial Printer
2 = Computer
This menu sets the type of serial device that the panel will be
connected to.
Press [MENU] + [6] + [3] + [0]. The keypad will display the
1)
current device type.
Device Type P001
00 - Diabled
Press 0-9 OK to SAVE
2) Use the up and down arrow keys to select the Device Type
required then press [OK] to save and exit or press [MENU] to
exit without saving.
Devices > Serial Device >
Baud Rate
0 = No Device Connected
1 = 300 Baud
2 = 600 Baud
3 = 1200 Baud
4 = 2400 Baud
This menu sets the baud rate or speed that the panel will send
data to the serial device. This should be set to the same baud
rate as the serial device.
Press [MENU] + [6] + [3] + [1]. The keypad will display the
1)
current baud rate.
Baud Rate P001
00 - No Device Conn
Press 0-9 OK to SAVE
2) Use the up and down arrow keys to select the Baud Rate
required then press [OK] to save and exit or press [MENU] to
exit without saving.
Bosch Security Systems 05/10 BLCC100I
MENU 6-3-0

MENU 6-3-1

5 = 9600 Baud
6 = 19200 Baud
Solution 16
plus

Devices > Serial Device >
Flow Control
0 = No Handshaking
1 = Hardware
2 = Xon-Xoff
This menu sets the appropriate flow control for the device you
are connecting the serial board to. The flow control method
must be the same on both devices for a serial connection to be
established.
Press [MENU] + [6] + [3] + [2]. The keypad will display the
1)
current flow control setting.
0
Flow Control P001
00 - No Handshaking
Press 0-9 OK to SAVE
2) Use the up and down arrow keys to select the Flow Control
required then press [OK] to save and exit or press [MENU] to
exit without saving.
Devices > GSM Modem >
Report Format
0 = SIA
1 = CID
2 = Domestic
Reserved for future use
0 Devices > GSM Modem >
Options
0 = Reserved
1 = Reserved
2 = Reserved
Reserved for future use.
» » E N D
Installation Manual Device Programming




O F S E C T I O N « «
MENU 6-3-2
0
MENU 6-5-0
0
MENU 6-5-1
0
10-7