Table of Contents
Advertisement
Technical description
6.2.1
Recommended torque
Connector
X3, X4
X0A, X0B, X7, X8, X9
Ground bolt
6.2.2
Fusing
Internal Fusing
Circuit
Auxiliary supply 24V
Brake resistor
External fusing
Fusible cutouts or similar
(Fuse UL time delay)
AC supply
24V supply
Brake resistor
(
x = S or S-R for 480V applications
6.2.3
Ambient conditions, ventilation, mounting position
Storage, hints
Transport, hints
Supply voltage tolerances
Ambient temperature in operation
Humidity in operation
Site altitude
Pollution level
Vibrations
Noise emission
Enclosure protection
Mounting position
Ventilation
Make sure that there is sufficient forced ventilation within the switchgear cabinet.
24
F
N1/2/3
F
H1/2/3
F
B1/2
Input power
Aux. power supply
07/2010
Recommended torque
0.5 to 0.6 Nm (4.43 to 5.31 in lb)
0.5 to 0.6 Nm (4.43 to 5.31 in lb)
3.5 Nm (31 in lb)
internal fuse
3.15 AT (FRx-3)
electronic
SERVOSTAR
601/ 603
6 AT (FRx-6)
max. 12 AF (max. FRx-12)
6 AT (FRS-6)
x = N or N-R for 230V applications
ð p.17
ð p.17
min 3x 230V
min 3x 208V
24 VDC (-0% +15%), check voltage drop
0 to +45°C (32 to 113°F) at rated data
+45 to +55°C (113 to 131°F) with power derating
rel. humidity 85%, no condensation
up to 1000m a.m.s.l. without restriction
1000 — 2500m a.m.s.l. with power derating
1.5%/100m
Pollution level 2 to EN 60664-1
Class 3M1 according to IEC 60721-3-3
max. 45 dB(A)
IP 20 according to EN60529
generally vertical. ð p.36
forced convection by built-in fan
®
SERVOSTAR
601...620 Instructions Manual
Kollmorgen
SERVOSTAR
SERVOSTAR
606/ 610
10 AT (FRx-10)
20 AT (FRx-25)
10 AT (FRS-10)
10 AT (FR10-10)
)
AC / max 3x 480V
-10%
AC / max 3x 480V
-10%
614/ 620
+10%
, 50 Hz
+10%
, 60 Hz
2.5% / K
Advertisement
Table of Contents
