Table of Contents
Advertisement
Kollmorgen
Handling
4
4.1
Transport
l
l
l
l
l
l
4.2
Packaging
l
l
l
4.3
Storage
l
l
l
l
l
4.4
Maintenance
The instruments do not require any maintenance, opening the instruments invalidates the warranty.
Cleaning :
®
SERVOSTAR
601...620 Instructions Manual
Only by qualified personnel in the manufacturer's original recyclable packaging
Avoid shocks
Temperature
–25 to +70°C, max. 20K/hr rate of change
Humidity
max. 95% relative humidity, no condensation
The servo amplifiers contain electrostatically sensitive components which can be da-
maged by incorrect handling. Discharge yourself before touching the servo amplifier.
Avoid contact with highly insulating materials (artificial fabrics, plastic films etc.). Place
the servo amplifier on a conductive surface.
If the packaging is damaged, check the unit for visible damage. In this case, inform the shipper
and the manufacturer.
Cardboard box, can be recycled
Dimensions:
SERVOSTAR 601...610
SERVOSTAR 614 / 620
Labeling : nameplate outside at the box
Storage only in the manufacturer's original recyclable packaging
Max. stacking height
8 cartons
Storage temperature
-25 to +55°C, max. rate of change 20°C / hour
Storage humidity
5 ... 95% relative humidity, no condensation
Storage duration
Less than 1 year without restriction.
More than 1 year: capacitors must be re-formed before setting up and operating the servo am-
plifier. To do this, remove all electrical connections and apply single-phase 230V AC for about
30 minutes to the terminals L1 / L2.
— if the casing is dirty: clean with Isopropanol or similar
Note: do not immerse or spray
— if there is dirt inside the unit it must be cleaned by the manufacturer
— dirty protective grill on fan must be cleaned with a dry brush
07/2010
(HxWxD) 125x415x350 mm
(HxWxD) 170x415x350 mm
Handling
17
Advertisement
Table of Contents
