Installing The Server Into A Telco Rack - Supermicro SuperServer SYS-511R-ML User Manual

Chapter 2: Server Installation

2.5 Installing the Server into a Telco Rack

If you are installing the system into a two post (Telco) rack, follow the directions on the
previous pages. The only difference in the installation procedure will be the positioning of
the rack brackets to the rack. They should be spaced apart just enough to accommodate the
width of the telco rack.
Figure 2-4. Installing the Server into a Telco Rack
Note: Figure is for illustrative purposes only. Always install servers to the bottom of a rack first.
25