BMW iX 2024 Owner's Handbook Manual page 369

In addition, an icon with a Check Control mes-
sage is shown on the control display.
Icon Possible cause
There has been a tyre pressure loss.
Measure
1. Reduce speed. Do not exceed a speed of
130 km/h, 80 mph.
2. At the next opportunity, for example at a
filling station, check the tyre inflation pres-
sure in all four tyres and correct if neces-
sary.
If there is a significant tyre pressure
loss
Message
A yellow warning light is illuminated in
the instrument cluster.
In addition, an icon indicating which tyre is af-
fected is shown in a Check Control message on
the control display.
Icon Possible cause
There is a flat tyre or substantial tyre
pressure loss.
Measure
1. Reduce your speed and carefully stop the
vehicle. Avoid heavy braking and sudden
steering manoeuvres.
2. Follow the description of what to do when
the vehicle gets a flat tyre.
What to do in the event of a flat tyre, see
page 370.
Online Edition for Part no. 01405A7AFB2 - II/23
Wheels and tyres
Messages: for tyres with special
approval
General
When a low tyre pressure is indicated, the Dy-
namic Stability Control may be turned on.
Safety information
WARNING
A damaged standard tyre with too little or no
tyre inflation pressure impairs driving charac-
teristics, for example steering and braking.
There is a risk of accident. Do not continue
driving. Repair the flat tyre or replace the
wheel.
If a tyre inflation pressure check is
required
Message
An icon with a Check Control message is
shown on the control display.
Icon Possible cause
The tyre was not inflated properly,
for example insufficient air was
added.
The system has detected a wheel
change, but no reset has been per-
formed.
The tyre inflation pressure has
dropped compared to the last reset.
No reset has been performed on
the system. System warning is
based on the tyre inflation pres-
sures saved during the last reset.
Measure
1. Check the tyre inflation pressure and adjust
as necessary.
2. Perform a system reset.
MOBILITY
369
OwnersManuals2.com