BMW iX 2024 Owner's Handbook Manual page 362

MOBILITY
Preparing the tyre repair kit
1. Insert the tyre sealant bottle into the mount
on the housing of the compressor.
2. Turn the tyre sealant bottle clockwise by
90° to the stop.
3. Connect the filler hose to the outlet of the
tyre sealant bottle and turn clockwise by
90° to the stop.
362
Wheels and tyres
Online Edition for Part no. 01405A7AFB2 - II/23
4. Unscrew the valve cap from the wheel and
screw the connecting piece of the filler hose
onto the valve.
5. With the compressor switched off, insert the
plug into the socket inside the vehicle inte-
rior.
Filling with tyre sealant
Safety information
NOTICE
The compressor can overheat if operated for
too long. There is a risk of material damage.
Do not let the compressor run for longer than
10 minutes.
Filling with tyre sealant
1. Switch on the compressor with standby
state or drive-ready state switched on.
Let the compressor run for max. 10 minutes
to fill in the tyre sealant and reach a tyre
inflation pressure of 2.5 bar.
While the tyre is being filled with tyre seal-
ant, the tyre pressure can briefly reach ap-
OwnersManuals2.com