BMW iX 2024 Owner's Handbook Manual page 156

CONTROLS
Dynamic Stability Control
Warning light pulsates: Dynamic Stabil-
ity Control is regulating the drive and
brake forces. The vehicle is being sta-
bilised. Reduce speed and adjust the driving
style to the road conditions.
Warning light is illuminated: Dynamic Stability
Control has failed or is initialising. The driving
stabilisation is restricted or has failed.
If the warning light is continuously illuminated,
have the system checked immediately by an
authorised Service Partner or another qualified
Service Partner or a specialist workshop.
For further information:
Dynamic Stability Control, see page 222.
Dynamic Stability Control restricted or
increased driving dynamics activated
Dynamic Stability Control is restricted
or increased driving dynamics is activa-
ted.
"SPORT PLUS" is activated.
For further information:
▷ Dynamic Stability Control, see page 222.
▷ Setting for increased driving dynamics, see
page 223.
Flat tyre monitor
The warning light is illuminated: the flat
tyre monitor reports a flat tyre or a tyre
pressure loss.
Reduce your speed and carefully stop the vehi-
cle. Avoid heavy braking and sudden steering
manoeuvres.
For further information:
Flat Tyre Monitor, see page 371.
156
Displays
Online Edition for Part no. 01405A7AFB2 - II/23
Tyre Pressure Monitor
The warning light is illuminated: the
Tyre Pressure Monitor reports a flat
tyre or a tyre pressure loss. Note the
information in the Check Control message.
Warning light flashes and is then illuminated
continuously: the system is unable to detect
flat tyres or tyre pressure losses.
▷ Fault due to systems or devices with the
same radio frequency: the system is auto-
matically reactivated upon leaving the field
of interference.
▷ For tyres with special approval: the Tyre
Pressure Monitor was unable to complete
the reset. Reset the system again.
▷ Wheel without wheel electronics is fitted: if
necessary have it checked by an authorised
Service Partner or another qualified Service
Partner or a specialist workshop.
▷ Malfunction: have the system checked by
an authorised Service Partner or another
qualified Service Partner or a specialist
workshop.
For further information:
Tyre Pressure Monitor, see page 365.
Steering system
The steering system may be faulty.
Have the system checked by an au-
thorised Service Partner or another
qualified Service Partner or a specialist work-
shop.
For further information:
Integral Active Steering, see page 224.
Lane Departure Warning
Depending on equipment and national-
market version:
Warning light is illuminated: functional
limitation detected, for example, due to low
sun or system failure. It is possible to continue
OwnersManuals2.com