BMW iX 2024 Owner's Handbook Manual page 272

CONTROLS
Malfunction
An icon is displayed on the control dis-
play.
Depending on the equipment, the de-
tection range of the sensors is not displayed
on the control display.
A Check Control message is shown.
Park Distance Control failure. Have the system
checked by an authorised Service Partner or
another qualified Service Partner or a specialist
workshop.
Active Park Distance Control
Principle
The Park Distance Control brake function ini-
tiates emergency braking if there is an immi-
nent risk of collision.
General
Due to the system limits, a collision cannot be
prevented under all circumstances.
The function is available at speeds below
walking speed when reversing or rolling back.
Pressing the accelerator pedal suppresses the
brake intervention. Emergency braking is not
performed.
After emergency braking to a stop, it is possi-
ble to continue a slow approach to the obsta-
cle. To approach, lightly depress the accelera-
tor pedal and release it again.
If the accelerator pedal is depressed for longer,
the vehicle pulls away. Manual braking is pos-
sible at any time.
Follow the information in the Chapter "Parking
assistance systems".
272
Parking
Online Edition for Part no. 01405A7AFB2 - II/23
Safety information
WARNING
The system does not relieve you of your per-
sonal responsibility to assess the traffic situa-
tion correctly. Due to system limits, it cannot
respond independently and appropriately in
all traffic situations. There is a risk of acci-
dent. Adapt your driving style to the traffic
conditions. Observe the traffic situation, be
ready to take over steering and braking at
any time, and actively intervene if the situa-
tion warrants it.
WARNING
When the trailer tow hitch is in use, the as-
sistance system cannot react correctly if its
sensors are obstructed. There is a risk of
accident or material damage. Do not use
the assistance system in trailer operation or
when using the trailer tow hitch, for example
with a bicycle carrier.
Sensors
The system is controlled using the following
sensors:
▷ Ultrasonic sensors in the rear bumpers.
▷ Side ultrasonic sensors.
Temporarily deactivating Active
Park Distance Control
After emergency braking, the function can be
temporarily deactivated on the control display.
1. "Obstacle detected. Emergency braking."
2. "Deactivate temporarily"
If the journey is continued in these environ-
mental conditions, no further emergency
braking is performed.
The function is automatically reactivated when
the Park Distance Control is switched on again.
OwnersManuals2.com