BMW iX 2024 Owner's Handbook Manual page 136

CONTROLS
Engaging selector lever position P
Press the key.
The transmission lock is engaged and
the parking brake is engaged.
When stopping the vehicle
Selector lever position D or R
On uphill gradients, the system prevents the
vehicle from rolling against the selected direc-
tion of travel and provides assistance when
driving off.
Selector lever position B
The system prevents the vehicle from rolling
away when it has come to a standstill and the
accelerator pedal is not pressed.
Driving off
To drive off, engage a drive position and press
the accelerator pedal.
The parking brake is automatically released.
Rolling or pushing the vehicle
General
In some situations, the vehicle may need to roll
a short distance without drivetrain, for example
in a conveyor car wash, or when being pushed.
136
Driving
Online Edition for Part no. 01405A7AFB2 - II/23
Engaging selector lever position N
NOTICE
The selector lever position P is automatically
engaged when standby state is switched off.
The wheels are locked. There is a risk of
material damage. Do not switch off standby
state if the vehicle is to roll, e.g. in conveyor
car washes.
1. Press the brake.
2. Switch on drive-ready state.
3. Engage selector lever position N.
4. Switch off drive-ready state.
Standby state then remains switched on
and a Check Control message is shown.
The vehicle can now roll.
Irrespective of standby state, selector lever po-
sition P is engaged automatically after approx-
imately 35 minutes.
If there is a fault, it may not be possible to
change the selector lever position.
Unlock the parking lock electronically if neces-
sary.
Unlocking the parking lock
electronically
General
Unlock the transmission lock electronically, e.g.
to manoeuvre the vehicle out of a danger area
in the event of a fault.
Before unlocking the parking lock, secure the
vehicle to prevent it from rolling away, for ex-
ample with a chock.
Engaging selector lever position N
1. Press the Start/Stop button three times
quickly; do not press the brake when doing
so.
2. Press the brake.
OwnersManuals2.com