BMW iX 2024 Owner's Handbook Manual page 235

Changing the speed
Press the corresponding button until
the set speed is set.
If the system is active, the displayed
speed is stored and the vehicle adjusts to the
stored speed when the road is clear.
The maximum speed which can be set de-
pends on the vehicle.
Pressing the button to the resistance point and
holding it: vehicle accelerates or decelerates
without pressure on the accelerator pedal.
When the button is released, the vehicle main-
tains the final speed. Pressing beyond the re-
sistance point accelerates the vehicle more
rapidly.
Resuming Cruise Control
At the stored speed
If Cruise Control is interrupted, it can be re-
sumed by calling up the stored speed.
Before calling up the stored speed, make sure
that the difference between the current speed
and the stored speed is not too great. Other-
wise, unwanted vehicle deceleration or accel-
eration may occur.
With the system interrupted, press the
button.
Cruise Control is resumed with the stored val-
ues.
In the following instances, the stored speed
value is deleted and therefore cannot be called
up again:
▷ When the system is switched off.
▷ When drive-ready state is switched off.
At the current speed
Press the button to continue Cruise
Control at the current speed.
Driver assistance systems
Online Edition for Part no. 01405A7AFB2 - II/23
Speed Limit Assist: at the suggested
speed
When a speed is suggested, press the
button to accept the Cruise Control at
the suggested speed.
Displays in the instrument cluster
Display in the speedometer
▷ Green marker: system is ac-
tive, the marker shows the
set speed.
▷ Grey marker: system is inter-
rupted; the marker shows the
stored speed.
▷ No marker: system is switched off.
Indicator light
▷ Green indicator light: the system is
active.
▷ No indicator light: the system is
turned off or interrupted.
Displays in the Head-up display
Depending on the equipment, some system
information can also be displayed in the Head-
up display.
System limits
The set speed is also maintained when driving
downhill. The vehicle may not achieve the set
speed on uphill gradients if there is not enough
drive power.
Depending on the drive mode, it is possible
that the vehicle will drive faster or slower than
the set speed setting in some situations; for
example, on downhill or uphill gradients.
CONTROLS
235
OwnersManuals2.com