BMW iX 2024 Owner's Handbook Manual page 367

10. After selecting the tyre size, select the load
status of the vehicle.
11. "Save tyre settings"
The measurement of the current tyre inflation
pressure is started. The progress of the meas-
urement is shown.
Status display
Current status
The status of the system, for example whether
the system is active, can be shown on the con-
trol display.
1. Apps menu
2. "Vehicle apps"
3. "Vehicle status"
4. "Tyre Pressure Monitor"
The current status is displayed.
Current tyre inflation pressure
The current tyre inflation pressure is displayed
for each tyre.
The current tyre inflation pressures can vary
depending on vehicle operation or outside
temperature.
Current tyre air temperature
The current tyre air temperatures are shown
depending on the model.
The current tyre air temperatures can change
as a result of driving the vehicle or the outside
temperature.
Nominal pressure
The nominal pressure for the tyres on the front
and rear axle is displayed.
The stated nominal pressure takes account of
the temperature effects caused by driving the
vehicle and the outside temperature. The ap-
propriate nominal pressure is always displayed
irrespective of the weather conditions, tyre air
temperatures and length of journey.
Online Edition for Part no. 01405A7AFB2 - II/23
Wheels and tyres
The displayed nominal pressure may vary and
differ from the value stated in the tyre inflation
pressure information on the body pillar of the
driver's door. The tyre inflation pressure can
thus be corrected to the value of the displayed
nominal pressures.
The nominal pressure is adjusted immediately
if the load status is changed in the tyre set-
tings.
Tyre statuses
General
The status of the system and tyres is indicated
by the wheel colour and a message on the
control display.
Existing messages may not be deleted if the
nominal pressure is not reached when the tyre
inflation pressure is corrected.
All wheels green
▷ The system is active and bases any warn-
ings on the nominal pressures.
▷ In the case of tyres with special approval:
the system is active and bases its warnings
on the tyre inflations pressures saved at the
last reset.
One to four wheels yellow
There is a flat tyre or major tyre pressure loss
in the tyres shown.
Wheels grey
Tyre pressure losses might not be detected.
Possible causes:
▷ Malfunction.
▷ The tyre inflation pressure is being meas-
ured, after confirmation of the tyre settings.
▷ For tyres with special approval: a system
reset is being performed.
MOBILITY
367
OwnersManuals2.com