BMW iX 2024 Owner's Handbook Manual page 365

Table of Contents

Advertisement

Tyre size
Wheel size
235/60 R20
8.5J x 20
255/50 R21
9J x 21
The information on wheel size and rim offset is
located on the inside of the wheel.
The list can also include wheel/tyre sizes that
are only suitable for certain models.
Information about approved wheels and tyres
for the vehicle can be requested from an au-
thorised Service Partner or another qualified
Service Partner or specialist workshop.
Observe the snow chain manufacturer's in-
structions.
If equipped with a Tyre Pressure Monitor: do
not reset the Tyre Pressure Monitor when us-
ing snow chains. Otherwise, incorrect values
may be displayed.
If equipped with a flat tyre monitor: do not ini-
tialise the flat tyre monitor when using snow
chains. Otherwise, incorrect values may be dis-
played.
When driving with snow chains, activate the
drive-off support to optimise propulsion, if nec-
essary.
Maximum speed with snow chains
When snow chains are fitted, do not exceed
50 km/h, 30 mph.
Rear-wheel steering with snow
chains
General
In order to guarantee freedom of movement of
the wheels when operating with snow chains,
rear-wheel steering must be turned off when
snow chains are mounted.
The rear-wheel steering is switched on again
automatically above the permitted maximum
speed for snow chains of 50 km/h, approx.
30 mph.
Rim offset (IS)
28
36
Online Edition for Part no. 01405A7AFB2 - II/23
Wheels and tyres
The setting for fitted snow chains is possible
only below 50 km/h, approx. 30 mph.
Safety information
WARNING
If the rear-wheel steering is activated while
snow chains are fitted, the snow chains may
come into contact with the vehicle bodywork.
There is a risk of accident or material dam-
age. Switch off the rear-wheel steering when
snow chains are fitted.
Switching off the rear-wheel steering
The rear-wheel steering is switched off by se-
lecting the 'snow chains fitted' setting.
1.
Apps menu
2.
"Vehicle apps"
3.
"Driving settings"
4.
"Drivetrain and chassis"
5.
"Snow chains"
Tyre Pressure Monitor
Principle
The Tyre Pressure Monitor monitors the tyre
pressure and issues a warning if the tyre pres-
sure has dropped.
General
Sensors in the tyre valves measure the tyre
inflation pressure and tyre air temperature.
Depending on the tyres detected or entered,
the system displays the specified nominal
pressures on the control display and compares
them to the current tyre inflation pressures.
If the vehicle is fitted with tyres which are not
listed in the tyre inflation pressure information
on the vehicle, for example tyres with special
approval, the system must be actively reset.
MOBILITY
365
OwnersManuals2.com

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents