BMW iX 2024 Owner's Handbook Manual page 270

Table of Contents

Advertisement

CONTROLS
Switching the system on/off manually
Press the key.
On: the LED is illuminated.
Off: the LED is extinguished.
If the system is manually switched on when
reverse gear is engaged, the image of the Re-
versing Assist Camera is displayed.
Depending on the national-market version, the
system cannot be turned off manually when
the reverse gear is engaged.
Acoustic warning
General
An intermittent tone indicates that the vehicle
is approaching an object. For example, if an
object is detected to the rear left of the vehicle,
the sound is emitted from the rear left loud-
speaker.
The shorter the distance to an object, the
shorter the intervals of the intermittent tones.
A continuous tone sounds if the distance to
a detected object is less than approximately
20 cm, 8 in.
An alternating continuous tone sounds from
the front and rear loudspeakers if there are
objects in front and behind the vehicle at the
same time and at a distance of less than ap-
proximately 20 cm, 8 in.
The intermittent tones and the continuous tone
are turned off when selector lever position P is
engaged.
Depending on the national-market version, the
interval tones are switched off after a short
time with the vehicle at a standstill.
If an object approaches when the vehicle is
stationary, the acoustic signal is reactivated.
270
Parking
Online Edition for Part no. 01405A7AFB2 - II/23
Adjusting the volume
The volume of the acoustic warning can be
adjusted.
1.
Apps menu
2.
"Vehicle apps"
3.
"Driving settings"
4.
"Driver assistance"
5.
"Parking"
6.
"PDC signal volume"
7.
Set the desired value.
Switching off the acoustic warning
Depending on the national-market version, the
acoustic warning can be switched off after the
start of the parking manoeuvre.
Press the
icon in the status field at the top
of the control display.
No audible warning is emitted during active
parking.
When the Park Distance Control is switched
on again, the acoustic warning is automatically
switched on again.
Visual warning
General
When you are approaching an object, its prox-
imity is displayed on the control display and in
the instrument cluster as soon as the system is
activated.
Objects that are farther away are already dis-
played before a signal sounds.
Depending on the view, driving lane lines,
turning circle lines and obstacle markings are
shown for a better estimation of the space re-
quired.
Depending on the equipment, the detection
range of the sensors is represented by hatched
ring-shaped areas. Markings in green, yellow
and red indicate when obstacles are detected
in the detection range.
OwnersManuals2.com

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents