BMW iX 2024 Owner's Handbook Manual page 137

3. Press the selector lever to position N.
A corresponding Check Control message is
shown.
Position N is displayed on the selector
lever.
4. Manoeuvre the vehicle out of danger and
then secure it against rolling away.
Switching off drive-ready state
When shutting down the vehicle, electrical sys-
tem operating noises may be heard, for exam-
ple if the high-voltage battery is being cooled.
After stopping:
1. Apply brake and engage the parking brake.
2. Press the Start/Stop button.
The READY display is no longer illuminated
and an acoustic signal is heard.
For longer stationary periods, follow the notes
in the mobility chapter.
For further information:
Service life of the high-voltage battery, long
stationary periods and putting the vehicle out
of use, see page 353.
Driving in detail: eDRIVE
Safety information
DANGER
The braking effect of the electric motor may
be more powerful than that in a vehicle with
an internal combustion engine. A sudden de-
celeration may result in other road users be-
ing obstructed. There is a risk of accident.
Gently release the accelerator pedal. Adapt
your driving style to the traffic conditions. Ob-
serve the traffic situation and intervene ac-
tively if the situation warrants it.
Online Edition for Part no. 01405A7AFB2 - II/23
Driving
WARNING
During electric driving, pedestrians and other
road users might not become aware of the
vehicle as they normally would due to the
lack of engine noise. There is a risk of acci-
dent. Adapt your driving style to the traffic
conditions. Observe the traffic situation and
intervene actively if the situation warrants it.
WARNING
Without energy recuperation, the braking ef-
fect of the electric drivetrain is not available.
The vehicle may roll further than usual. There
is a risk of accident. Adapt your driving style
to the traffic conditions. Observe the traffic
situation and intervene actively if the situa-
tion warrants it.
Accelerator pedal positions,
displays
1 Deceleration and energy recovery,
CHARGE
2 Rolling
3 Acceleration or constant speed: ePOWER
CONTROLS
137
OwnersManuals2.com