BMW iX 2024 Owner's Handbook Manual page 294

CONTROLS
Adjusting the temperature
The desired temperature can be set individu-
ally in the menu bar for the driver and front
passenger.
▷ Increase the temperature.
▷ Reduce the temperature.
Setting the temperature adjustment
When the automatic programme is switched
on, the speed of the heating and cooling proc-
ess can be adjusted as follows:
▷ "BALANCED".
The setting enables a smooth, low-noise
adjustment of the interior temperature.
▷ "DYNAMIC".
The setting enables a quick adjustment of
the interior temperature with a high amount
of air.
Setting the automatic rear air-
conditioning system temperature
Via iDrive
1. "CLIMATE MENU"
2. "Settings"
3. "Second row of seats"
4. Set the desired temperature.
Using the button
Press the upper or lower side of the
button to set the desired temperature.
294
Air conditioning
Online Edition for Part no. 01405A7AFB2 - II/23
Footwell temperature
General
The air temperature in the footwell can be ad-
justed.
The set interior temperature for driver and
front passenger is not changed by this.
Adjusting the footwell temperature
1. "CLIMATE MENU"
2. "Settings"
3. "Driver" or "Front passenger"
4. "Temperature adjustment for footwell"
5. Increase or decrease the temperature.
Air conditioning function
Principle
The air in the interior is cooled and dried and
then heated again depending on the tempera-
ture setting.
Operating requirements
Standby state or drive-ready state is switched
on.
Switching the cooling function on/off
1. "CLIMATE MENU"
2. "A/C"
Depending on the weather conditions, the
windscreen and the side windows may mist
over for a short time after switching on drive-
ready state.
Cooling produces condensation, which then
exits underneath the vehicle.
OwnersManuals2.com