BMW iX 2024 Owner's Handbook Manual page 351

power failure, the charging process will con-
tinue automatically after the interruption.
When the vehicle is charged at a public charg-
ing station, the charging process may not con-
tinue automatically after an interruption.
Ending charging process
1. Disconnect the charging cable from the ve-
hicle.
Removing, see page 346.
2. Stow the charging cable if necessary.
3. Press the charging socket flap closed until it
engages.
4. Lock the vehicle if necessary.
Goodbye screen on the control
display
When the drive-ready state is turned off, a
menu will appear on the control display where
some of the settings for charging via iDrive can
be entered.
Displays in the instrument
cluster
When the standby state is switched on, the
charging status display shows the charge state
of the high-voltage battery in the instrument
cluster.
The charge display displays information about
the charging process.
Display Meaning
Charging the vehicle with a Mode 2
charging cable or Mode 3 charging
cable.
Charging the vehicle with a DC
charging cable.
Online Edition for Part no. 01405A7AFB2 - II/23
Charging the vehicle
Display Meaning
Current charging power.
icon indicates when the maxi-
mum charging power of the vehicle
has been reached.
Maximum charging current strength
or currently set current limitation.
Charging cable locked.
Charging cable unlocked.
Set charge target.
Departure time set.
One-time departure time set.
Air conditioning activated for depar-
ture time.
Flashing: ventilation or cooling ac-
tive.
Flashing: heating active.
Blue symbol: reduced charging ca-
pacity due to low temperature of
the high-voltage battery.
White symbol: reduced charging ca-
pacity due to high temperature of
the high-voltage battery.
Battery heat management active.
MOBILITY
351
OwnersManuals2.com