BMW iX 2024 Owner's Handbook Manual page 368

Table of Contents

Advertisement

MOBILITY
For tyres with special approval:
performing a reset
1.
Apps menu
2.
"Vehicle apps"
3.
"Vehicle status"
4.
"Tyre Pressure Monitor"
5.
Make sure that the tyre settings are correct.
Tyre settings, see page 366.
6.
Switch on drive-ready state but do not drive
off.
7.
Reset the tyre inflation pressure: "Perform
reset"
8.
Drive off.
The wheels are shown grey and the following
appears on the display: "Resetting tyre
pressure...".
After driving for several minutes, the set tyre
inflation pressures are accepted as the speci-
fied tyre inflation pressures. The reset is com-
pleted automatically during the journey.
If the reset was successful, the wheels are
shown in green on the control display and the
following appears: "Reset successful."
You can interrupt your journey at any time.
The reset resumes automatically when you
continue driving.
Messages: for tyres without special
approval
General
When a low tyre pressure is indicated, the Dy-
namic Stability Control may be turned on.
Safety information
WARNING
A damaged standard tyre with too little or no
tyre inflation pressure impairs driving charac-
teristics, for example steering and braking.
There is a risk of accident. Do not continue
368
Wheels and tyres
Online Edition for Part no. 01405A7AFB2 - II/23
driving. Repair the flat tyre or replace the
wheel.
With recommended tyre pressure
check
Message
An icon with service information is shown on
the control display and, if necessary, in the My
BMW App.
Icon
Possible cause
Leak detected on the tyre.
Measure
Check the tyre inflation pressure and adjust as
necessary.
If a tyre inflation pressure check is
required
Message
An icon with a Check Control message is
shown on the control display.
Icon
Possible cause
The tyre was not inflated properly, for
example insufficient air was added or
there was a natural, even tyre pres-
sure loss.
Measure
Check the tyre inflation pressure and adjust as
necessary.
If the tyre inflation pressure is too low
Message
A yellow warning light is illuminated in
the instrument cluster.
OwnersManuals2.com

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents