BMW iX 2024 Owner's Handbook Manual page 297

When the defrost function is switched on, the
automatic rear air-conditioning system is de-
activated to provide maximum power.
Turning the defrost function on/off
Press the key.
The LED in the button is illuminated
when the system is switched on.
Rear window heating
Principle
With the rear window heating, ice and conden-
sation are quickly removed from the rear win-
dow.
Operating requirements
Standby state or drive-ready state is switched
on.
Turning the rear window heating
on/off
Press the key.
The LED is illuminated when the rear
window heating is switched on.
The rear window heating switches off auto-
matically after a while.
If pre-conditioning is turned on, the rear win-
dow heating is activated as needed.
Seat heating
Principle
The system heats the seats and panels if re-
quired.
Online Edition for Part no. 01405A7AFB2 - II/23
Air conditioning
General
Seat heating can also be used without panel
heating. Deactivate the panel heating if neces-
sary.
If a drive is resumed within about 15 minutes
after a temporary stop, the functions are auto-
matically switched on at the last temperature
setting.
Turning the seat heating on/off
1. "CLIMATE MENU" tap in the centre of the
air conditioning bar.
2. Seat heating.
3. Select the desired setting.
If a drive mode for a consumption-optimised
driving style is selected, the heater output is
reduced.
Switching the seat heating for the
rear automatic climate control on
Press the button once for each temper-
ature stage.
The highest temperature if the three
LEDs are illuminated.
Switching off the seat heating for
the rear automatic climate control
Press and hold the button until the
LEDs are extinguished.
Active seat ventilation
Principle
The system cools the seat and backrest surfa-
ces if required and ensures a pleasant seating
climate.
CONTROLS
297
OwnersManuals2.com