BMW iX 2024 Owner's Handbook Manual page 167

▷ "Since factory": the values since leaving
the factory are displayed.
▷ "Since Individual ( )": the values since
the last manual reset are displayed. The
values can be reset at any time.
Resetting average values manually
The following interval can be reset manually at
any time:
"Since Individual ( )"
Using the knurled wheel on the steering wheel:
1. Display trip data in the instrument cluster.
2. Press and hold the knurled wheel
on the steering wheel until the val-
ues are reset.
Via iDrive:
1. Apps menu
2. "Vehicle apps"
3. "System settings"
4. "Time period for journey data"
5. "Reset Individual"
The average values and counters are reset.
Once the average values and counters have
been reset, the following interval is automati-
cally activated:
"Since Individual ( )"
Assisted View
Principle
With Assisted View, information on driver as-
sistance systems can be displayed on the in-
strument cluster with a vehicle animation.
Information on parking and manoeuvring is
displayed in Assisted View whenever Park As-
sist is enabled.
Online Edition for Part no. 01405A7AFB2 - II/23
Displays
Safety information
WARNING
The system does not relieve you of your per-
sonal responsibility to assess the traffic situa-
tion correctly. Due to system limits, it cannot
respond independently and appropriately in
all traffic situations. There is a risk of acci-
dent. Adapt your driving style to the traffic
conditions. Observe the traffic situation, be
ready to take over steering and braking at
any time, and actively intervene if the situa-
tion warrants it.
General
The Assisted View display can be configured in
the central indication range and displayed.
For further information:
Central display area, see page 165.
Display
An example with active driver assistance: the
indicator and warning lights for the distance
control and the Lane Change Assistant indi-
cate a lane change to the next lane. At the
same time, the lane change to the next lane is
shown with animation in the Assisted View.
System limits
The detection capability of the system is limi-
ted.
Only objects detected by the system are taken
into account.
CONTROLS
167
OwnersManuals2.com