BMW iX 2024 Owner's Handbook Manual page 280

CONTROLS
General
A recurring manoeuvre is driven manually and
thereby recorded.
When the vehicle reaches the activation range
on the distance covered by the stored ma-
noeuvre, the manoeuvre can be activated on
the control display or in the instrument cluster.
After the activation, the system takes control
of the vehicle and carries out the manoeuvre
automatically.
The manoeuvre can be performed with the Re-
mote Control Parking function using a smart-
phone.
Follow the information in the Chapter "Parking
assistance systems".
Safety information
WARNING
The system does not relieve you of your per-
sonal responsibility to assess the traffic situa-
tion correctly. Due to system limits, it cannot
respond independently and appropriately in
all traffic situations. There is a risk of acci-
dent. Adapt your driving style to the traffic
conditions. Observe the traffic situation, be
ready to take over steering and braking at
any time, and actively intervene if the situa-
tion warrants it.
WARNING
When the trailer tow hitch is in use, the as-
sistance system cannot react correctly if its
sensors are obstructed. There is a risk of
accident or material damage. Do not use
the assistance system in trailer operation or
when using the trailer tow hitch, for example
with a bicycle carrier.
280
Parking
Online Edition for Part no. 01405A7AFB2 - II/23
WARNING
The system can steer the vehicle over or onto
kerbs. There is a danger of injury or material
damage. Observe the traffic situation and in-
tervene actively if the situation warrants it
Detection range
The detection range for a manoeuvre is divi-
ded into the following areas:
▷ Proximity range, arrow 1: the system will
begin with the localisation in the back-
ground within a range of approx. 8 m/26 ft
around the path of a stored manoeuvre.
▷ Close range, arrow 2: in a range of
approx. 2 m, approx. 6 ft around the path,
the stored manoeuvre will be displayed on
the control display.
▷ Activation range, arrow 3: the stored
manoeuvre can be activated on the control
display within a range of approx. 1 m, ap-
prox. 3.5 ft. After the activation, the system
takes control of the vehicle and carries out
the manoeuvre automatically.
Sensors
The system is controlled by the following sen-
sors and cameras:
▷ Ultrasonic sensors in the front/rear bump-
ers.
▷ Side ultrasonic sensors.
▷ Front camera.
OwnersManuals2.com