Table of Contents
Advertisement
NOTE:
„ SatCR can only work in combination with an optional multi-output (max. 8) satellite splitter
and a SatCR LNB, an example is STRONG type SRT L780 (max. 4 users).
„ SatCR cannot be combined with any other DiSEqC function. SatCR systems are mainly installed
by professional experts.
7.3.6 TS information
Select to check signal quality of antenna dish system with real technical details.
Use p q to select Freqency /Transponder from ASTRA 19.2 satellite.
The Signal Strength and Signal Quality indicators with show you the levels of selection.
Above level inducators are shown MER in dB and BER: in error values.
This menu you can use to optomise the antenna dish and LNB angle.
7.4 Settings
Use t u to access the menu Settings, which includes the following submenus: Language setting, Output
setting, Interface setting, Time setting, Change password, Parental control, USB upgrade, Software Update (OTA),
Factory default and Information.
Use p q to select the submenu and press OK. Use t u to change the value or OK to select it from the list.
Use the button to return to the previous step. Press
mode.
7.4.1 Language setting
Menu Language:
Audio language:
Subtitle language:
Teletext language:
7.4.2 Output settings
This submenu allows you to set the output parameters of the receiver according to a connected TV set and
to the audio ampli er (if applicable).
Tv display:
Resolution:
NOTE:
Experiment with the settings to nd the options that suit the best for you. You can change the
parameters of the viewing mode by pressing OPT.
Audio output:
SCART:
Select the preferred language for the On-Screen display.
Select the preferred audio language for watching TV channels. This setting allows you
to de ne the default audio track or language.
Digital TV allows the operator to transmit more than one audio track or language.
If a channel has multiple audio tracks or languages, the receiver will select the
suitable audio track automatically according to your selection.
If the language is not available, the default programme language will be used.
Choose your preferred subtitle language or keep set to O .
Set display charther set to belonging language for tele text.
Select an aspect ratio depending on your TV set screen format. Available options:
Auto, 4:3 or 16:9 formats.
Select the screen resolution according to the characteristics and supported modes of
your TV set. Available options: 576i, 576p, 720p, 1080i and 1080p.
Adjust this setting in accordance to the connected audio equipment.
Set the BitStream option to bypass original audio bitstream through S/PDIF to a
connected audio equipment that can decode complex digital audio formats. Set the
PCM option to convert complex digital audio formats supported by the receiver to
STEREO audio and pass it to the S/PDIF output.
This setting is only relevant when the receiver is connected to the TV set via SCART.
Select RGB for the best picture quality or CVBS if your TV does not support RGB.
to exit the menu and to go back to the viewing
21
Advertisement
Table of Contents
