Table of Contents
Advertisement
NOTE:
Channels can be change, move to other frequency or gone in future and can lead to non
reception.
7.3.3 HD+ Channel Restore
If you like only to restore the channel list from operator. Select this menu item and start with OK.
The receiver will restore channel list including the channel order automatically now.
7.3.4 Manual scan
This menu item allows you to install channels from speci c Satellite and Fequency / Transponder.
Use p q to select required parameters. Use t u to change option values or OK to select it from the list.
Use the button to return to the previous step. Press
mode.
Satellite:
Transponder:
The Signal Strength and Signal Quality indicators on the 2nd half of the screen will help you to make sure
that you get the signal with the selected parameters, as well as to adjust the antenna if necessary. Press OK
to scan the selected satellite signal. A window with the scan progess will be appear.
7.3.5 Satellite edit
This menu item allows you to install channels from speci c Satellite(s) and to set up your antenna dish
installations parameters.
Use p q to select satellite. Use t u to change option values or OK to select it from the list. Press GREEN
button to add new satellite or Transponder. Press BLUE button to open LNB settings menu. Use the button
to return to the previous step. Press
Satellite:
Transponder:
DiSEqC
Tone Burst:
DiSEqC port:
Unicable Channel:
LNB Power:
The Signal Strength and Signal Quality indicators on the 2nd half of the screen will help you to make sure
that you get the signal with the selected parameters, as well as to adjust the antenna if necessary.
SatCR
If a SatCR LNB is used, please refer to the manual of the respective LNB to obtain technical data on user
bands numbers and corresponding frequencies.
Select a satellite to be con gured and scanned.
Select one of the available transponders.
to exit the menu and to go back to the viewing mode.
Select a satellite to be con gured and /or scanned.
Select one of the available transponders of the chosen satellites in order to check
your reception or align the antenna.
Select which antenna system is used.
Options are: O , Tone Burst, DiSEqC1.0,DiSEqC1.1, Sat CR and dCss system.
Set the tone control of your LNB. Available options: O , Tone-A, Tone-B
Select the correct port of the corresponding LNB.
Available options: O , LNB 1, ..., LNB 4
Select the correct channel of the corresponding LNB system.
Available options: CH_1 1210, ..., Ch 8...more.
Set the LNB power On or O . (Default set to On).
to exit the menu and to go back to the viewing
20
Advertisement
Table of Contents
