Connecting To Digital Audio Ampli Er; Basic Connection Using An Hdmi Cable - Strong SRT 7815 User Manual

A Connect the LNBs of your xed antenna to the inputs of a DiSEqC 1.0 switch using a good quality coaxial
cable and suitable 'F-connectors' .
B Connect the output or "to receiver" of the DiSEqC 1.0 switch to the SAT IN connector on your receiver. Use
good quality coaxial cable and suitable "F-connectors".
C Plug the power adapter jack to the receiver and the other end to a suitable wall outlet.

3.2 Connecting to digital audio ampli er

Connect one end of a good quality coaxial audio cable to the S/PDIF output of your receiver and the other
end to the coaxial audio input of your home theatre, ampli er or any other device supporting digital audio.

3.3 Basic connection using an HDMI cable

a. Connect the LNB of your satellite antenna to the SAT IN connector of your receiver using a good quality
coaxial cable and suitable 'F-connector' plugs.
b. Connect one end of a good quality HDMI cable to the HDMI output on your receiver and the other end to
the HDMI input of your TV.
c. Plug the power adapter to a suitable wall outlet.
IN LIZENZ VON DOLBY LABORATORIES
GEFERTIGT. DOLBY, DOLBY AUDIO
UND DAS DOPPEL-D-SYMBOL SIND
EINGETRAGENE MARKEN
DER DOLBY LABORATORIES
LICENSING CORPORATION.
Digital audio amplifier
IN LIZENZ VON DOLBY LABORATORIES
GEFERTIGT. DOLBY, DOLBY AUDIO
UND DAS DOPPEL-D-SYMBOL SIND
EINGETRAGENE MARKEN
DER DOLBY LABORATORIES
LICENSING CORPORATION.
11
Fig. 7 b
Fig. 8 a