Telnet Command Table - HID HDP 5000 User Manual

3.2.2 Telnet command table

The following table describes available Telnet commands.
Note: You can enter partial full-word commands, the printer responds with additional help. For example,
you can enter "list", and the printer responds with all subcommands to the list command.
Telnet Command
?
help
reset
ping
diff
uptime
sysinfo
ribbon
net
stored net
default net
User
lpq
Printer
Printer sm
10
Telnet server
Command Purpose
Display help for Telnet commands.
Reset the Ethernet interface for the Printer/Encoder. reset
Send a ping command to another IP address as a
test of the Ethernet interface.
Display all differences between current and stored
network settings.
Display how long since the interface was last reset.
Display information about the printer (i.e., model,
label, contact, location, Firmware version and date,
and serial number).
Display information about the installed Ribbon in the
printer.
Display information about the current network
settings of the Ethernet interface.
Display information about the stored network
settings of the Ethernet interface.
Display information about the default network
settings of the Ethernet interface.
Display information about the defined User names
and their type (root or guest privileges).
Display information about print jobs and their
settings.
Display information about the printer (i.e., model
number, Firmware version and serial number).
Display information about the secure mark settings
of the printer.
L001675, 1.2
Command Format
?
ping <IPADDR>
list diff
list uptime
list sysinfo
list ribbon
list net
list stored net
list default net
list User
list lpq
list printer
list printer sm
July 2019