Telnet Server; Network Management Interface - HID HDP 5000 User Manual

Network services overview L001675, 1.2

2.4 Telnet server

The Ethernet interface has a command line interpreter. You can connect to the printer using a Telnet
session on your PC, issue commands to the printer and receive responses from the printer.
The Telnet commands are primarily used for network administration, and they are not used by most users.
These commands query the state of the printer and configure various settings for the printer. These include
network settings, logging settings, user names, and user passwords.

2.5 Network Management interface

The SNMP interface is an Ethernet interface that is a fully-manageable SNMP agent that supports MIB-II.
The Ethernet interface is MIB-II compliant, allowing SNMP managers to monitor protocol, network, and
routing statistics.
8 July 2019