HID HDP 5000 User Manual page 11

L001675, 1.2
Telnet Command
set sysinfo contact
location
label
from
syslog name
type
dest
email
udp
from
set User add
del
passwd
type
from
July 2019
Command Purpose
Set the contact string.
Set the location string.
Set the label string.
Set all strings from default or current settings.
Change the name of a system log path
Change the type of a system log path. This starts or
stops logging on start of jobs or on faults.
Change the destination of a system log path. This
may be set to none, e-mail, udp or tcp.
Change the e-mail address for e-mail notification for
a system log path. It must specify a valid e-mail
address.
Specify the IP address of the UPD system logging
program.
Restore system log path settings from the default or
current settings.
Add a new User definition.
The printer allows only two (2) User definitions.
Delete a User definition.
Define a new password for a User.
Specify a User as root or guest.
Only root Users have administrative rights to change
network interface settings.
Restore User setting from default or stored settings. set User from default|stored
Telnet server
Command Format
set sysinfo label [<STRING>]
set sysinfo location [<STRING>]
set sysinfo label [<STRING>]
set sysinfo from default|current
set syslog <LOG_NAME> name
<NEW_NAME>
set syslog <LOG_NAME> type
[[-]job] [[-]pfault]
set syslog <LOG_NAME> dest
none|email|udp|tcp
set syslog <LOG_NAME> email
<EMAIL>
set syslog <LOG_NAME> udp
<IPADDRESS>
set syslog from default|current
set User add <NAME>
set User del <NAME>
set User passwd <NAME>
[<PASSWORD>]
set User type <NAME> root|guest
11