Grounding Generator To Truck Or Trailer Frame; Ground Cable Routing - Miller Trailblazer 330 Diesel Owner's Manual

5-2.

Grounding Generator to Truck or Trailer Frame

1-1. Grounding Generator To Truck Or Trailer Frame
Always ground generator frame to
vehicle frame to prevent electric
shock and static electricity hazards.
Also see AWS Safety & Health Fact
Sheet No. 29, Grounding of Portable
And Vehicle Mounted
Generators.
5-3.

Ground Cable Routing

OM-291102 Page 26
�
Complete Parts List is available at www.MillerWelds.com
GND/PE
Bed liners, shipping skids, and
some running gear insulate the
welding generator from the vehicle
frame. Always connect a ground
wire from the generator equipment
grounding terminal to bare metal on
Welding
the vehicle frame as shown.
1 Equipment Grounding
Front Panel)
2 Grounding Cable (Not Supplied)
1
2
3
1 2
3
3 Metal Vehicle Frame
Connect cable from equipment ground ter-
minal to metal vehicle frame. Use #8 AWG
or larger insulated copper wire.
�
Terminal (On
�
See Section 5-2 prior to routing ground-
1 Equipment Grounding Stud
2 Grounding Cable
3 Grounding Cable Retention Clip
Route cable from equipment grounding ter-
minal to metal frame through cable retention
clip.
Use #8 AWG insulated copper wire.
Electrically bond generator frame to
vehicle frame by metal-to-metal
contact.
ing wire.