Process Screen - Miller Trailblazer 330 Diesel Owner's Manual

6-8.

Process Screen

To change weld process, rotate Adjust Con-
trol/Select button to desired process and
press button to select.
Process Typical Process Application
SMAW XX18 (STICK) Constant current process. Use this process for 7018, 6013, 7024 (308, 309 316),
and any other stainless-steel electrodes.
SMAW XX10 (STICK) Constant current process. Use this process for 6010, 7010, 8010, and 6011.
CAC-A (GOUGE) Gouging with or without remote amperage control. Strike an arc to start gouging.
GTAW (TIG) Lift-Arc TIG: Touch tungsten to work and lift to start welding. Circuitry internal to
welder/ generator aids arc start.
GMAW/FCAW (GAS) MIG solid wire and dual shield flux core use a voltage sensing (VS) feeder that does
not require a control cable back to the welder/generator.
FCAW-S (NO GAS) Constant voltage process used with self-shielding flux core without use of shielding
gas.
SPOOL GUN (SPOOL) Constant voltage process used for aluminum/FCAW-s wire types. Requires spool
gun with 10 pin connection.
*Polarity Reversing model will default to specified polarity.
OM-291102 Page 38
1
1 Process Button
Press to open process selection screen.
2
2 Menu Button
Press to open Menu.
Polarity*
DCEP(+)
DCEP(+)
DCEP(+)
DCEN(-)
DCEP(+)
DCEN(-)
DCEP(+)