Battery Charge/Jump Troubleshooting - Miller Trailblazer 330 Diesel Owner's Manual

11-5. Battery Charge/Jump Troubleshooting

Trouble
No battery charge/jump output.
Charging current turns on and off
while charging battery.
OM-291102 Page 74
Be sure battery is connected.
Check battery voltage, charging may be finished.
Have Factory Authorized Service Agent check battery charge circuitry.
�
This machine will not charge or jump start a completely dead battery. Some voltage must be de-
tected from the battery that is being charged/jump started or this function will not work.
Clean and tighten battery connections, if necessary. Clean battery terminals and posts with baking
soda solution and rinse with clear water.
Fully charged batteries, or batteries that do not take any charge, may experience intermittent charg-
ing. This is normal.
Always check unit before applying power. See Pre-Power Checks.
Remedy