Grounding Generator To Truck Or Trailer Frame; Installing Exhaust Pipe - Miller Big Blue 450 Duo CST Owner's Manual

1-1. Installing Exhaust Pipe

5-2.

Grounding Generator to Truck or Trailer Frame

1-1. Grounding Generator To Truck Or Trailer Frame
Always ground generator frame to
vehicle frame to prevent electric
shock and static electricity hazards.
Also see AWS Safety & Health Fact
Sheet No. 29, Grounding of Portable
And Vehicle
Generators.
5-3. Installing Exhaust Pipe
1-2. Installing Exhaust Pipe
1/2 in.
wrench
�
Complete Parts List is available at www.MillerWelds.com
Mounted Welding
crescent wrench
1 2
GND/PE
3
Bed liners, shipping skids, and
some running gear insulate the
welding generator from the vehicle
frame. Always connect a ground
wire from the generator equipment
grounding terminal to bare metal on
the vehicle frame as shown.
1 Equipment Grounding Terminal
Front Panel)
2 Grounding Cable (Not Supplied)
3 Metal Vehicle Frame
Connect cable from equipment ground ter-
minal to metal vehicle frame. Use #8 AWG
or larger insulated copper wire.
�
Electrically bond generator frame to
vehicle frame
(On
contact.
Exhaust1 2018 01 / Ref. 803604
Stop engine and let cool.
�
Point exhaust pipe in desired direction
but always away from front panel and
direction of travel.
Exhaust Pipe3 2018 01 / Ref. 803582
OM-4428 Page 1
by metal-to-metal
OM-266621 Page 25